Description
The premium low-frequency transducers of the VIO L210, positioned in a V-shape and sealed in a bass-reflex wooden enclosure, are custom-designed to improve efficiency and endure high-stress conditions, providing accurate transient response and extended low-end reproduction. A single 3” voice coil compression driver (1.4” exit throat) delivers precise high frequencies. A brand-new waveguide contributes to creating a cylindrical wavefront, allowing for highly precise high-frequency directivity control, which benefits the system’s throw distance. The acoustic enclosure is completed by two solid aluminum phase plugs located in front of both woofers, acting as an extension of the constant directivity high-frequency waveguide. Each phase plug features 26 diamond-shaped holes to reduce interference in the crossover zone while improving frequency and transient response. ADVANCED DSP COUPLED WITH SELF-POWERED EFFICIENCY The module features a highly efficient Class D Digipro G3 900 W RMS amplifier capable of reaching 135 dB SPL. Perfect coherence is guaranteed even at long distances thanks to advanced sound processing with FIR filters. The preamp module is also equipped with digital optical isolation to avoid audio coupling, preventing any noise caused by potential differences. SMART RIGGING HARDWARE & ACCESSORIES FOR FAST DEPLOYMENT The VIO L210 comes with a built-in 3-point rigging system for smooth and fast system setup. The two front links easily connect the modules from any angle. The rear central rigging strand is equipped with a hook-type link to set the relative splay angles determined via the dBTechnologies Composer prediction software. While lifting the array, the rigging strand automatically locks the systems at the preset angles.
Technical Data
Speaker Type: 2-way Active Line Array Module
Acoustical Data
Usable Bandwidth [- 6 dB]
67-20,000 Hz
Frequency Response [+/- 3dB]
78-18,100 Hz
Max SPL
135 dB
HF 1×1.4″
Voice Coil HF 3″
Type HF
Neodymium, Titanium Diaphragm LF 2×10″
Voice Coil LF 2.5″
Type LF
Neodymium Aluminium Phase Plug
Horizontal Directivity 100°
Vertical Directivity
Depends on array size and configuration
Amplifier
Amp Technology
Digipro G3
Amp Class Class-D
Power RMS 900 W
Peak Power 1800 W
Cooling Convection
Power Supply 900 W SMPS with Auto-range PSU
Processor
Controller DSP 56 bit
AD/DA Converter 24 bit/48 KHz
Limiter Dual Active Multiband Peak, RMS, Thermal
Processing (filters)
FIR Linear Phase
Crossover Frequency LF-HF 950 Hz
Slope LF-HF 24 dB/Octave
Input / Output
Signal Input 1xXLR fem, Bal.
Signal Output 1xXLR male, Bal.
Network
RDNet remote control RJ45 connector IN/OUT
Power Socket
1xPowerCon TRUE1 IN
1xPowerCon TRUE1 Out
Controls
1xSpeakers Coupling (7 presets)
1x HF Compensation (8 presets)
1x Input Attenuation Rotary Switch
Mechanics
Multiplex Plywood
Polyurea painted
Housing Design:
Trapezoidal 10°
Handles
2x side
Rain Cover
Included Rigging Points
Integrated rigging hardware
Width 720 mm (28.35 in)
Height 320 mm (12.6 in)
Depth 520 mm (20.47 in)
Weight 28.6 Kg (63.00 lbs)
