Description
VIO L208 is a 2-way active line array system equipped with 2x 8” neodymium woofers and 1x 1.4” neodymium compression driver (3” voice coil). The transducers are located behind an all-in-one panel that acts as a phase plug and an HF horn. The waveguide behind this panel contributes to creating a cylindrical wavefront, greatly benefiting HF throw distance. Each VIO L208 module is powered by a Class-D Digipro G3 900W amplifier module with auto-range PSU. Perfectly coherent emission is ensured thanks to advanced sound processing with FIR filters. The preamp module is also equipped with digital optical isolation, guaranteeing an interference-free input signal. Like the larger VIO L210 system, the VIO 208’s wooden enclosure comes with an integrated rigging system designed for simplicity and speed: a rear central rigging strand allows relative splay angles to be set directly in the dedicated DT-VIOL208 transport cart, which can accommodate 4 modules plus 1 fly bar. When lifting the array, the rigging strand automatically locks the systems at the preset angles without heavy lifting. The dedicated 3-point DRK 208 fly frame allows for precise array inclination and is ready to house an optional inclinometer laser pointer. When not in use, the fly bar can be easily stored in the transport cart. With the AF-VIO1 accessory, you can rig the module under a flyable VIO S118 subwoofer or alternatively use the VIO 208 as a fill in larger VIO L210 systems. The same accessory also acts as a safety interface in stacked configurations on VIO sub-systems. A lighter TF-VIO1 transition frame allows the installation of the VIO L208 only under flown VIO L210 units. VIO L208 features built-in presets allowing users to process the system manually. Each preset can be easily changed remotely via Aurora Net control software.
Technical Data
Speaker Type 2-way Active Line Array Module
Acoustical Data
Usable Bandwidth [- 6 dB] 75 Hz – 20 KHz
Frequency Response [+/- 3dB] 85 Hz -18.1 KHz
Max SPL 133.5 dB
HF 1×1.4″
Voice Coil HF 3″
Type HF Neodymium
LF 2×8″
Voice Coil LF 2″
Type LF Neodymium
Horizontal Directivity 100°
Vertical Directivity depends on array size and configuration
Amplifier
Amplifier
Amp Technology Digipro G3
Amp Class Class-D
Power RMS 900 W
Peak Power 1800 W
Cooling Convection
Power Supply 900 W SMPS with Auto-range PSU
Processor
Controller DSP 28/56 bit
AD/DA Converter 24 bit/48 KHz
Limiter Dual Active Peak, RMS, Thermal
Processing (filters) FIR Linear Phase Filters
Crossover Frequency LF-HF 1000 Hz
Connections
Signal Input 1xXLR fem, Bal.
Signal Output 1xXLR male, Bal.
Network RDNet remote control RJ45 connector IN/OUT
Mains Connections 1x PowerCON TRUE1 In
1x PowerCON TRUE1 Out
Controls 1xSpeakers Coupling (7 presets)
1x HF Compensation (8 presets)
1XInput Attenuation Rotary Switch
Enclosure
Housing Multiplex Plywood
Polyurea painted
Handles 1 x Side, 2 on back
Rain Cover Included
Rigging Points Integrated 3-point flying hardware
Width 600 mm (25.98 in)
Height 260 mm (10.23 in)
Depth 390 mm (15.35 in)
Weight 18.1 Kg (39.9 lbs)
